High-performance polymeric formulations designed for rapid settling, color removal, and municipal/industrial sludge dewatering.
Modern wastewater engineering relies on the optimization of zeta potential reduction and inter-particle bridging. Historical reliance on simple inorganic salts, such as classic aluminum sulfate or ferric chloride, has proven insufficient under tight municipal and industrial COD limits. Our Sewage Treatment Model incorporates high-charge density macromolecular chains that enhance charge neutralization.
By optimizing the basicity of Polyaluminum Chloride (PAC) and Aluminum Chlorohydrate (ACH), Wuxi BS has created a synthesis model that delivers a high concentration of Al30 polymers. This structure minimizes sludge volume index (SVI) and increases the rate of sedimentation. Additionally, the integration of high-density cationic polymers, such as Poly(diallyldimethylammonium chloride) (PDADMAC) and custom-engineered Cationic Polyacrylamide (CPAM), allows industrial plants to capture colloidal micro-flocs that bypass conventional physical barrier systems.
Understanding the technology route of polymer synthesis is critical for industrial procurement. Our factory focuses on three primary chemical pathways:
Globally, environmental regulators are standardizing stricter COD, nitrogen, and phosphorus emission limits. Standard biological treatment methods often fail when processing high-salinity chemical wastewater, dye residues, or petrochemical backwash.
Using composite chemical dosage models, chemical oxygen demand (COD) is mitigated by accelerating the physical precipitation of suspended carbon compounds. In advanced economies like North America and the EU, where water recycling is heavily regulated, high-purity coagulants are required to prevent membrane fouling in downstream Reverse Osmosis (RO) and Ultrafiltration (UF) systems.
Filter and explore our engineered compound configurations optimized for industrial water systems.
Combines the rapid settling of iron salts with the high-charge neutralization of polymeric aluminum. Ideal for low-temperature, low-turbidity industrial raw water.
Customized formulation blending mineral coagulants and organic flocculants to treat highly complex municipal and chemical plant wastewater streams.
Highly stable yellow/yellowish powder with Al2O3 content up to 30%. Excellent solubility and low dust formulation for safe handling.
Pre-hydrolyzed solution (10%-15% active Al2O3). Ready for direct metering pump dosage, minimizing on-site dilution complexity.
Wuxi BS Water Treatment Chemicals Co., Ltd. (established in 1998) combines advanced production lines, digital solid feeding equipment, and rich water chemistry expertise to serve municipal and industrial enterprises worldwide.
Our top three high-efficiency reagents designed to meet critical wastewater purification guidelines.
Excellent flocculation and rapid molecular bridging. Ideal for sludge dewatering in centrifugal decanters and belt filter presses.
Highly effective cationic polymer for color removal in wastewater from textile, dye houses, papermaking, and printing plants.
A strong cationic polymer designed for charge neutralization. Widely applied in drinking water purification and paper mill retention aid systems.
Wastewater properties vary significantly by industry. Our customized chemical programs adapt to regional regulations and water chemistry profiles.
Designed to optimize phosphorus removal and sludge compaction. In municipal primary clarifiers, our PAC/ACH formulation reduces biological plant loading by removing up to 85% of suspended solids prior to aeration.
Designed to break oil-water emulsions. When dosing PDADMAC coupled with specific anionic polymers, refinery oily wastewater undergoes rapid phase separation in dissolved air flotation (DAF) units.
In RO and UF systems, colloidal silica and organics cause rapid membrane scaling. Our high-basicity ACH forms large, stable flocs that are easily backwashed, extending membrane service life.
Assists in paper pulp retention and charge neutralization of "anionic trash." Our dual-polymer systems reduce fiber loss, improve sheet drainage, and clarify process white water.
High-purity PAC (PAC-01) and low-monomer PDADMAC ensure minimal heavy metal residues in municipal potable water, meeting strict health standard guidelines.
How Wuxi BS secures your chemical supply chain and offers tailored product customization.
Our specialized chemical engineers provide customized dosage calculations, jar tests, and process troubleshooting to optimize chemical efficiency.
Our annual sales volume exceeds 500,000 tons. Supported by advanced storage facilities, we maintain a finished product inventory of over 20,000 tons to prevent supply disruptions.
Supported by automated production lines and comprehensive quality control, we ensure raw material traceability and consistent chemical properties.
We invest in molecular optimization, developing low-dust granules and high-solubility polymers that lower chemical consumption and system downtime.
A history of continuous development in chemical manufacturing processes since 1998.
Manufacturing facility established to produce regional municipal water treatment agents.
Company restructured as Wuxi Bisheng Water Treatment Agent Co., Ltd., expanding industrial coagulation production lines.
Commenced global export business, establishing a distributor network across Southeast Asia and Latin America.
Annual export sales exceeded $10 million. Expanded automated liquid storage capacity.
Formally established the specialized Foreign Trade Division and launched digital intelligent solid feeding technologies.
Developing biodegradable coagulants and eco-friendly polymeric formulas to support global carbon neutrality goals.
Expert answers to common engineering questions regarding the application and dosage of our polymers.
Follow our team's ongoing developments in digital chemical dosing and international chemical exhibitions.
Expanding chemical distribution networks across Europe and Southeast Asia, optimizing logistics to support high-demand municipal facilities.
Read Article
Wuxi BS launched automated solid polymer feed equipment, reducing dosage errors by up to 15% in industrial clarifier systems.
Read Article
Presenting our low-carbon chemical synthesis route at the 2025 Development Conference for Aluminum and Iron Salts.
Read ArticleProvide your wastewater specifications (pH, temperature, COD, turbidity), and our engineers will recommend optimized chemical dosages and customized formulations.
Solid granules, liquid concentrates, and specialized cationic agents available for global bulk supply.
BS Water
